Wednesday, August 18, 2010

John Devost’s Taig Lathe Cross Slide Drilling Rig

“Some pics of my Taig lathe showing a 'mod/hack' that I did to drill brass rod with the 'cross-slide', as opposed to the 'tailstock', it's for a puzzle I'm making that has 30 brass dowels with magnets at each current tailstock has kinda' been through the ringer and this set-up makes things easier and more accurate as well ;) BTW - Pic also shows your 'index plate' that I finally got around to putting on :)"

jdev05 jdev06 jdev07 jdev08

Check out John’s Pens and Puzzles for sale.

Tuesday, August 17, 2010

John Silvia’s Knurling Tool

John Silvia sent these pics of a knurling tool made on the Taig lathe and mill: 


"I was inspired to make a set of knurling tools based on a picture I saw of an old German knurling tool.  The design and construction was heavily influenced by the material and tools that I had on hand.  As can be seen in the photos I was experimenting with the exact design and dimensions as I made it.  It is somewhat oversized for the taig but I intend to use it someday on a larger lathe with the addition of a second pivot assembly.
Speaking of the pivot assembly, although it looks like brass in the photos, it is made of some bronze I happened to have.  The 1/4" bar for the taig tool holder is attached off center to help raise the tightening knob as high as possible to keep fingers well clear when knurling close to the chuck.
I had planned to hold the knurl pivots in place via set screws; but two sets of knurls that I ordered had shoulders on them that increased their width to the point that there wasn't enough room for set screws, so I had to use a different retaining mechanism made from "hacksaw blades" from the dollar store.  This means that more clearance is required on one side when knurling but this really doesn't matter since the arms can be flipped to put the retaining mechanism on either side.
I'm pleased with the results.  The first thing I knurled is the knob for the tool itself.
If I were making another one for the taig only, I would make the arms shorter.  When I try to knurl a long test piece, a lot of torque is put on the tool holder.  It is difficult to get it secured well enough that it doesn't accidentally pivot when advancing the knurler along the knurlee.  Shorter arms would probably help reduce the torque.  I bought the springs at the local hardware store.  They make it slightly more convenient to use but are not necessary.
This is only the second item of any complexity at all that I have machined myself so please be understanding when viewing the pictures.  This was very much a learning experience for me."

jsilvia02 jsilvia03 jsilvia04 jsilvia05 jsilvia06

Monday, August 16, 2010

Athena’s Inlay And Some Links

Athena sent in two pics of her first inlay tests using the Taig CNC mill. athena01

A cross in silver and abalone.


"A shot of a little test I ran yesterday.  I have tons of designs for fretmarker inlays.  One is little silhouettes of various pistols and rifles.  I did a test run of an Uzi to see what it would look like in real life.  It's less than a half inch tall.   My builder friend is going to make an M1 Carbine theme guitar I'm designing an inlay for right now, so guns are kind of a theme now."

And some links:

Caligari’s Truespace 3D Model software is now free

Dean put up details of his Taig mill Countershaft

Youtube video about a hidden door company that happens to use a Taig mill. (0:42 to 0:46)